Instructor-LED Certification In

BCS Certificate in Requirements Engineering

£1,550.00

This course includes

  • Language - English Language - English
  • Accessible on desktop, tablet and mobile Accessible on desktop, tablet and mobile
  • Full lifetime access Online proctored examination
  • Certificate of Completion Certificate on Examination Success

BCS Certificate in Requirements Engineering

Please note, this course does not include the exam in the cost. To book the exam and take it at the end of your course please contact our team.

This intensive three-day course develops the skills needed to work with requirements stakeholders to ensure that requirements satisfy various perspectives and that conflicts are negotiated to a position of consensus.

Delegates will learn how to work with stakeholders and other requirements actors to ensure the requirements are complete, unambiguous, realistic and testable.

Target Audience:

This course is for those wishing to acquire the skill set required for establishing system requirements and those wishing to attain the BCS Certificate in Requirements Engineering.

Prerequisites

  • There are no specific pre-requisites for this course.
  • Those delegates taking the BCS certificate will need to spend 60-90 minutes each evening whilst on the course doing revision and example examination questions.
  • If you are taking and booking the BCS exam, you must bring photographic identification with you (passport, driving licence, work ID or student card), as it is a BCS requirement to produce it for the invigilator prior to the exam. Failure to produce a valid form of photographic identification will result in a candidate not being able to sit the exam. For any questions about what form of identification is acceptable please contact our team.
  • BCS allow additional time for candidates who have a disability or whose native language differs to that of the examination paper. Full details are provided in the BCS Reasonable Adjustments Policy which is available to view on the BCS website. If you believe you qualify for this then please notify the Exam Administration team on the details below as early as possible. At least two weeks’ notice will be required for processing this request. Delegates failing to advise us and provide evidence when requested, may not be allowed the additional support offered via the BCS policy..

Following your exam you will be sent an email from BCS asking you to register for your exam. Once you have registered and your exam results become available then you will be able to log back into your account and view your results.

Delegates will learn how to

At the end of this course you will be able to:

  • Describe the roles and responsibilities of key stakeholders in the requirements engineering process
  • Demonstrate the application of a range requirements elicitation techniques
  • Explain the use of requirements elicitation techniques and the relevance of the techniques to given situations
  • Document and prioritise user requirements for an information system
  • Identify problems with requirements and explain how requirements documentation may be improved
  • Create a process/function model of requirements for an information system
  • Interpret a model of the data requirements for an information system
  • Explain the importance of linking project objectives and requirements to the Business Case
  • Describe the principles of Requirements Management and explain the importance of managing requirements
  • Describe the use of CASE tools to support Requirements Engineering
  • Explain the principles of Requirements Validation and define an approach to validating requirements

This intensive three-day BCS Certificate in Requirements Engineering course develops the skills to work with stakeholders and other requirements.

We're on Google!

mary apamo
mary apamo
11:31 06 Jan 21
I enjoyed my training on lean six sigma. The trainer is very knowledgeable and he was able to expalin the concepts very... well. I would recommend MakeWay Global for their quality and excellence.read more
Obele Godsfavour
Obele Godsfavour
10:07 04 Jan 21
Thank you MakeWay Global for a seamless opportunity to learn and implement the LeanSixSigma body of knowledge. I made... my black belt!read more
Karima Loucif
Karima Loucif
12:59 12 Oct 20
I really enjoyed my journey with MakeWay Global.My Lean Six Sigma training was very interesting and usefulGrand Merci... à Kolaread more
Wilhelmina Atitsogbi
Wilhelmina Atitsogbi
15:35 10 Sep 20
The course is very well structured and was well delivered by the instructor.
Kabir Walker
Kabir Walker
09:29 23 Jul 20
MakeWay Global is undoubtably the best training company I have worked with. Their professionalism, ability and... willingness to help is genuinely second to none.Kabir Walkerread more
kiki Fredricks
kiki Fredricks
10:15 14 Feb 20
Fantastic Training! Kola is a great teacher.
Aanuoluwapo S
Aanuoluwapo S
10:11 14 Feb 20
At the end of the lean six sigma training I was able to identify improvement opportunities for my work processes which... will form my green belt project.Excellent training! Will definitely recommend.read more
Fiyinfoluwa Bamigbola
Fiyinfoluwa Bamigbola
10:09 14 Feb 20
Great Course ..! Very Immersive.. and Hands On...The Kola(the facilitator) covered a large amount of the Subject matter... under a short period while keeping it engaging..read more
ADEBOLA SURAKAT
ADEBOLA SURAKAT
10:09 14 Feb 20
It was a very insightful training experience, the facilitator had a good grasp of the topic and concept and his... delivery style is excellent!read more
energy training
energy training
18:02 27 Jan 20
This has been a fantastic experience for our organization. Incredible knowledge of Lean Six Sigma by the facilitator.
Lucy Kemboi
Lucy Kemboi
10:45 22 Nov 19
Great concept ! Looking forward to putting in practice!Very interactive teaching style! I highly recommend
O'Neil Rane
O'Neil Rane
10:25 22 Nov 19
Great training and great instructor. Very meticulous and professional. Happy to have been able to participate and learn
Bolatito Babafemi
Bolatito Babafemi
11:40 15 Nov 19
The training delivered by Kola Olutimehin was superb and excellent, he is such a talented trainer in Lean six sigma.
Mary Ogunpeju
Mary Ogunpeju
11:35 15 Nov 19
The sessions were very educating and eye opening!I look forward to putting to good use all i have learnt to improve... processes organization.read more
Next Reviews
js_loader

Need to train 5 or more people?


Get your team access to 100+ top courses anytime, anywhere. Contact our support team for any applicable discount or send an email to connect@makewayglobal-com.preview-domain.com.

REGISTER TODAY FOR ATTRACTIVE DISCOUNTS.

FOR ENQUIRIES, PLEASE CALL:

020 3858 3600(UK)
(+44 20 3858 3600 from outside the UK)


081 2022 6125/081 3114 6561(NIGERIA)
(+234 812 022 6125/+234 813 114 6561 from outside Nigeria)

Description

BCS Certificate in Requirements Engineering

Please note, this course does not include the exam in the cost. To book the exam and take it at the end of your course please contact our team.

This intensive three-day course develops the skills needed to work with requirements stakeholders to ensure that requirements satisfy various perspectives and that conflicts are negotiated to a position of consensus.

Delegates will learn how to work with stakeholders and other requirements actors to ensure the requirements are complete, unambiguous, realistic and testable.

Target Audience:

This course is for those wishing to acquire the skill set required for establishing system requirements and those wishing to attain the BCS Certificate in Requirements Engineering.

Prerequisites

  • There are no specific pre-requisites for this course.
  • Those delegates taking the BCS certificate will need to spend 60-90 minutes each evening whilst on the course doing revision and example examination questions.
  • If you are taking and booking the BCS exam, you must bring photographic identification with you (passport, driving licence, work ID or student card), as it is a BCS requirement to produce it for the invigilator prior to the exam. Failure to produce a valid form of photographic identification will result in a candidate not being able to sit the exam. For any questions about what form of identification is acceptable please contact our team.
  • BCS allow additional time for candidates who have a disability or whose native language differs to that of the examination paper. Full details are provided in the BCS Reasonable Adjustments Policy which is available to view on the BCS website. If you believe you qualify for this then please notify the Exam Administration team on the details below as early as possible. At least two weeks’ notice will be required for processing this request. Delegates failing to advise us and provide evidence when requested, may not be allowed the additional support offered via the BCS policy..

Following your exam you will be sent an email from BCS asking you to register for your exam. Once you have registered and your exam results become available then you will be able to log back into your account and view your results.

Delegates will learn how to

At the end of this course you will be able to:

  • Describe the roles and responsibilities of key stakeholders in the requirements engineering process
  • Demonstrate the application of a range requirements elicitation techniques
  • Explain the use of requirements elicitation techniques and the relevance of the techniques to given situations
  • Document and prioritise user requirements for an information system
  • Identify problems with requirements and explain how requirements documentation may be improved
  • Create a process/function model of requirements for an information system
  • Interpret a model of the data requirements for an information system
  • Explain the importance of linking project objectives and requirements to the Business Case
  • Describe the principles of Requirements Management and explain the importance of managing requirements
  • Describe the use of CASE tools to support Requirements Engineering
  • Explain the principles of Requirements Validation and define an approach to validating requirements

This course includes

  • Language - English Language - English
  • Accessible on desktop, tablet and mobile Accessible on desktop, tablet and mobile
  • Full lifetime access Online proctored examination
  • Certificate of Completion Certificate on Examination Success

We're on Google!

mary apamo
mary apamo
11:31 06 Jan 21
I enjoyed my training on lean six sigma. The trainer is very knowledgeable and he was able to expalin the concepts very... well. I would recommend MakeWay Global for their quality and excellence.read more
Obele Godsfavour
Obele Godsfavour
10:07 04 Jan 21
Thank you MakeWay Global for a seamless opportunity to learn and implement the LeanSixSigma body of knowledge. I made... my black belt!read more
Karima Loucif
Karima Loucif
12:59 12 Oct 20
I really enjoyed my journey with MakeWay Global.My Lean Six Sigma training was very interesting and usefulGrand Merci... à Kolaread more
Wilhelmina Atitsogbi
Wilhelmina Atitsogbi
15:35 10 Sep 20
The course is very well structured and was well delivered by the instructor.
Kabir Walker
Kabir Walker
09:29 23 Jul 20
MakeWay Global is undoubtably the best training company I have worked with. Their professionalism, ability and... willingness to help is genuinely second to none.Kabir Walkerread more
kiki Fredricks
kiki Fredricks
10:15 14 Feb 20
Fantastic Training! Kola is a great teacher.
Aanuoluwapo S
Aanuoluwapo S
10:11 14 Feb 20
At the end of the lean six sigma training I was able to identify improvement opportunities for my work processes which... will form my green belt project.Excellent training! Will definitely recommend.read more
Fiyinfoluwa Bamigbola
Fiyinfoluwa Bamigbola
10:09 14 Feb 20
Great Course ..! Very Immersive.. and Hands On...The Kola(the facilitator) covered a large amount of the Subject matter... under a short period while keeping it engaging..read more
ADEBOLA SURAKAT
ADEBOLA SURAKAT
10:09 14 Feb 20
It was a very insightful training experience, the facilitator had a good grasp of the topic and concept and his... delivery style is excellent!read more
energy training
energy training
18:02 27 Jan 20
This has been a fantastic experience for our organization. Incredible knowledge of Lean Six Sigma by the facilitator.
Lucy Kemboi
Lucy Kemboi
10:45 22 Nov 19
Great concept ! Looking forward to putting in practice!Very interactive teaching style! I highly recommend
O'Neil Rane
O'Neil Rane
10:25 22 Nov 19
Great training and great instructor. Very meticulous and professional. Happy to have been able to participate and learn
Bolatito Babafemi
Bolatito Babafemi
11:40 15 Nov 19
The training delivered by Kola Olutimehin was superb and excellent, he is such a talented trainer in Lean six sigma.
Mary Ogunpeju
Mary Ogunpeju
11:35 15 Nov 19
The sessions were very educating and eye opening!I look forward to putting to good use all i have learnt to improve... processes organization.read more
Next Reviews
js_loader

Need to train 5 or more people?


Get your team access to 100+ top courses anytime, anywhere. Contact our support team for any applicable discount or send an email to connect@makewayglobal-com.preview-domain.com.

REGISTER TODAY FOR ATTRACTIVE DISCOUNTS.

FOR ENQUIRIES, PLEASE CALL:

020 3858 3600(UK)
(+44 20 3858 3600 from outside the UK)


081 2022 6125/081 3114 6561(NIGERIA)
(+234 812 022 6125/+234 813 114 6561 from outside Nigeria)